Display Mode - SSS Siedle BVPS 850-0 Manual Del Usuario

Deleting images
It is only possible to delete the com­
plete video memory.
1 Open the menu
Settings >
Video memory.
2 Select "Delete all pictures".
The enquiry "Deleting complete
video memory. Are you sure?" will
appear.
3 To confirm, select "Yes" and press
the Enter button.

Display mode

The camera image can either be dis­
played in format 4:3 (standard) or as
a full screen image.
Under Settings > Video image >
Display mode set which size you
wish to set as standard in response
to a door call.
• Standard
• Full screen
With an active door call or speech
connection, use the button ∨ to
switch to the "Full screen" display
mode or the button ∧ to switch to
the "Standard" display mode.
Servicing work
Reset to default settings and
basic settings
Resetting the panel to the as­deliv­
ered status will only affect settings
which you can change at the panel,
such as the ring tones or display
settings.
Programming by the electrical
installer will not be lost.
1 Open the menu
Settings >
Factory setting.
2 Press the Enter button to reset the
panel to the default setting.
As soon as the process has been
completed, the menu Settings >
Language appears and you are
guided through the basic settings.
3 Carry out the following settings in
sequence:
• Language
• Time format
• Automatic time changeover
(summertime / normal time)
• Date format
• Date and time
Confirm every setting process you
have performed with the Enter
button.
Once the basic settings have been
performed, the main menu appears
in the display.
13