Warranty; Pre-Installation - Defiant MSLED1801D Guia Del Usuario

Warranty

The following warranty is exclusive and in lieu of all other warranties, whether express, implied or statutory
incluiding, but not limited to, any warranty of merchantability or fitness for any particular purpose.
Cooper Lighting, LLC ("Cooper Lighting") warrants to customers that, for a period of two years from the date of
purchase, Cooper Lighting's products will be free from defects in materials and workmanship. The obligation of
Cooper Lighting under this warranty is expressly limited to the provision of replacement products. This warranty
is extended only to the original purchaser of the product. A purchaser's receipt or other proof of date of original
purchase acceptable to Cooper Lighting. This is required before warranty performance shall be rendered.
This warranty does not apply to Cooper Lighting products that have been altered or repaired or that have been
subjected to neglect, abuse, misuse or accident (including shipping damages). This warranty does not apply to
products not manufactured by Cooper Lighting which have been supplied, installed, and/or used in conjunction
with Cooper Lighting products. Damage to the product caused by replacement bulbs or corrosion or discoloration
of brass components are not covered by this warranty.
Limitation of liability: In no event shall Cooper Lighting be liable for special, indirect, incidental, or consequential
damages (regardless of the form of action, whether in contract, strict liability, or in tort including negligence), nor
for lost profits; nor shall the liability of Cooper Lighting for any claims or damage arising out of or connected with
these terms or the manufacture, sale, delivery, use, maintenance, repair or modification of Cooper Lighting products,
or supply of any replacement parts therefore, exceed the purchase price of cooper Lighting products giving rise to a
claim. No labor charges will be accepted to remove or install fixtures.
Contact the Customer Service Team at 1-866-308-3976 or visit www.HomeDepot.com.

Pre-installation

Before beginning assembly of product, make sure all
parts are present. Compare parts with package contents
list and hardware contents. If any part is missing
or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20 minutes
note: No electrical wiring to your household is
necessary for this product.
□
Allow fixture to receive four full days of sunlight
while in OFF mode to fully charge the battery.
□
Locate solar panel in an area that will receive the
maximum amount of sunlight during the daylight
hours. Locate panel to receive at least 3-4 hours
of direct sunlight daily.
□
Test your charged unit before
permanently installing.
□
Install the motion sensor 8–12 feet above
the ground. Motion sensor is less sensitive
above 12 feet.
□
Locate motion sensor so motion moves across
detection zone.
□
Locate sensor away from heat producing sources
to prevent false triggering. Also be very careful not
to include objects such as windows, white walls
and water in the detection zone.
Sensor detects motion that moves
across the detection zone.
3
Please contact 1-866-308-3976 for further assistance.
HOMEDEPOT.com