Cleaning And Maintenance - Clatronic MC 692 CD Instrucciones De Servicio/Garantía

Музыкальный центр CLATRONIC МС 692 CD Blue
В интернет-магазине www.clatronic-shop.com.ua
Programmed Repeat with the PROGRAM Button
This can be used to program any desired sequence of tracks.
1. Press the
2. Press the PROGRAM key (8/5). „0" fl ashes in the display (17) together with
the PROGRAM control lamp. Use the I
desired track and then press the PROGRAM button (8/5) again.
3. Select the next track with the I
PROGRAM button again. Repeat the procedure until all the desired tracks are
selected.
4. Press the
shown in the display in the correct order. Press this button to pause briefl y the
playback.
5. Press once the
6. To resume the playback of the program press fi rst the PROGRAM key (8/5)
once and then the
7. To delete the program (in stop mode) fi rst press the PROGRAM button (8/5)
and then the
The device stops automatically once the entire sequence of programmed tracks
is completed. Programming is also deleted if the CD is removed from the CD
compartment or the machine switched off.
It is also possible to combine the programmed tracks with the REPEAT function.
After you have programmed and started the device, please press the REPEAT
button (1/4) up to three times and then you can use the functions as described
under „REPEAT".
Please note these instructions for playing back CDs and CDRs in MP3
format! The device is not able to play back MP3 fi les. The CD begins to turn,
but the sound cannot be heard.
Please note:
There are a number of different recording and compression methods, as well as
quality differences between CDs and self-recorded CDs.
Furthermore, the music industry does not adhere to fi xed standards (copy
protection). For these reasons that there may occasionally be problems with the
playback of CDs. This is not a malfunction of the device.
• Always remove the mains plug before cleaning the machine.
• Any marks on the surface can be wiped off with a slightly damp cloth without
any additives.
05-MC 692 CD 43
(stop) key (3/2).
II key (7/1). The playback starts. The selected track numbers are
(stop) key to stop the playback while retaining the program.
II key (7/1).
(stop) button (3/2).

Cleaning and Maintenance

/ I buttons (5/4/3) to select the
/ I buttons (5/4/3) and press the
GB
43
20.10.2005, 14:14:46 Uhr