Yakima HighRoller Manual Del Usuario página 2

Do you have - square - rounD - or oTher - crossbars?
Loosen the tabs in the
SQuare
SnapArounds by bending
them repeatedly.
• Attach 1
SnapAround on rear
bar for wheeltray.
• Attach 2
SnapArounds
on front bar for
baseplate.
• Attach 1
round
SnapAround on rear
bar for wheeltray.
• Attach 2
SnapArounds
on front bar for
baseplate.
MIGHTYMOUNTS:
• Attach 2 MightyMounts on the rear bar
and 1 on the front bar.
other
• If your MightyMounts require bar caps,
install them now. Metal bar caps should
be applied to back crossbar (front of bike
mount). Refer to this diagram in place of
your MightyMount instructions.
MightyMounts purchased separately
(refer to the YAKIMA Fit List for correct
MightyMounts for your vehicle).
mIghtymount
1033349G-2/21
unIVerSal
#03590
remove the
tabs with
scissors or
pliers.
Follow the Universal MightyMount
instructions and refer to this instruction for
correct installation.
HATCH INTERFERENCE:
HighRoller can face opposite direction
when there is hatch interference.
+
HATCH INTERFERENCE:
HighRoller can face opposite direction
when there is hatch interference.
+
rear oF VehICle