Yakima HighRoller Manual Del Usuario página 3

Lift both hoops until they stop.
Position mount anywhere
on crossbars.
insert short
baseplate bolts
through bottom of
SnapArounds into
baseplate.
LOOSeLy AttAch
thumbwheeLS.
Slide wheeltray bolt into
rear end of wheeltray.
1033349G-3/21
Remove baseplate cover. Press sides and lift to expose bolt holes.
if you position the front mount straddling a tower, the
wheel tray can attach to either side of the rear tower.
MightyMount users:
• Remove embedded nut
in thumbwheel.
• Push hex bolt into top of
knob until fully seated.
• Insert hexogaonal bolts
through thumbwheels
into baseplate.
• LOOSeLy AttAch
thumbwheeLS.
MightyMount users:
Remove embedded nut in
mightymount.
Align bolt to hole...
SecuRe with
hex Key.