What's In The Box - Bose Professional ControlSpace WP22B-D Guia De Instalacion

WP22B-D Installation Guide
pro.Bose.com
The WP22B-D includes two balanced mic/line XLR inputs and two
balanced XLR line outputs; the inputs support 48V phantom power.
Connection to the Dante network is provided by a single Ethernet
RJ-45 connector on the back of the unit. The WP22B-D is PoE
powered over the network cable from a suitable PoE source (IEEE
802.3af) eliminating the need for a local power supply.
Note: The WP22B-D has a label on the front of the metal housing at
the top that lists the last 6 digits of the MAC address. Important for
initial device identification, these digits are part of the device's default
network name when detected by Bose ControlSpace Designer
® ® ™
software. The full MAC address is also given on the back of the unit.

What's in the Box

The WP22B-D comes supplied with the following:
• WP22B-D wall plate
• Mounting screws
• Decora plate
13