Envirolite EVL4730C Instrucciones De Instalación

LED 4" RETROFIT TRIM INSTALLATION INSTRUCTIONS
Please read carefully and save these instructions as you may
need them at a later date.
GENERAL: All electrical connections must be in accordance with local
and National Electrical Code (N.E.C.) standards. If you are unfamiliar with
proper electrical wiring connections obtain the services of a qualified
electrician.
Remove the trim from the box and make sure that no parts are missing by
referencing the PARTS illustrations.
THIS RETROFIT ASSEMBLY IS ACCEPTED AS A COMPONENT OF A
LED LUMINAIRE WHERE THE SUITABILITY OF THE COMBINATION
SHALL BE DETERMINED BY CSA OR CANADIAN AUTHORITIES
HAVING JURISDICTION.
_______________________________________________
WARNING- RISK OF FIRE OR ELECTRIC SHOCK
FOR USE WITH INCANDESCENT HOUSING MODELS: COMMERCIAL
ELECTRIC HBR2000B, HBR2000R, HBR2000BICAT;
H99RT, H99ICT, H99TAT,
X2000LICAT, X2000LRICAT, X2000LICATB; CAPRI R4, RR4; ELCO
EL99A, EL99RA, EL99ICA; JUNO TC1, TC1R; LITHONIA L3, L3R;
PROGRESS P832-TG, P830-TG; THOMAS PS4, PS4-RM; NORA
NSCIC-40IAT; ELITE B4, 4R. HALO LED HOUSINGS – H995ICAT,
H995RICAT.
• Do not alter, relocate, or remove wiring, lampholders, power supply, or
any other electrical component. Installation of the retrofit assembly
requires a person familiar with the construction and operation of the
luminaire's electrical system and the hazard involved. If not qualified,
do not attempt installation. Contact a qualified electrician.
• Do not make or alter any open holes in an enclosure of wiring or
electrical components during kit installation.
• To prevent wiring damage or abrasion, do not expose wiring to edges
of sheet metal or other sharp objects.
____________________________
ASSEMBLY AND INSTALLATION
INCANDESCENT HOUSINGS
1. Unscrew the WING NUT inside the CAN to detach the SOCKET
BRACKET from the CAN. Disengage the SOCKET from the SOCKET
BRACKET. (FIG. 1)
2. Thread the SOCKET ADAPTER into the SOCKET. (FIG. 2)
3. Plug the MALE CONNECTOR of the SOCKET ADAPTER to the
FEMALE CONNECTOR of top of the RETROFIT TRIM. (FIG. 3)
4. Tuck all wires into the CAN and carefully push the RETROFIT TRIM
into CAN. (NOTE: To provide enough room in shallow cans, carefully
position SOCKET ADAPTER and SOCKET adjacent to the side of the
LED DRIVER prior to inserting the RETROFIT TRIM into the CAN.)
(FIG. 4)
LED HOUSINGS
1. Plug the MALE CONNECTOR of the SOCKET ADAPTER to the
FEMALE CONNECTOR of top of the RETROFIT TRIM. (FIG. 3)
2. Tuck all wires into the CAN and carefully push the RETROFIT TRIM
into CAN. (FIG. 4)
MODELS EVL4730C & EVL4733C
HALO H99T,
H99RTAT, H99ICAT; CORDELIA
QUESTIONS? CALL TOLL
FREE
WARNING - RISK OF ELECTRIC SHOCK. DISCONNECT
MAIN POWER AT FUSE OR CIRCUIT BREAKER
BEFORE INSTALLING OR SERVICING THE FIXTURE.
PARTS
SOCKET ADAPTER
RETROFIT TRIM
1-855-573-6156
COMPATIBLE HOUSING
DIMENSIONS
4 in.