Preparation - Hammerhead HCCH120 Manual Del Usuario


sAfETY InfoRMATIon
• Do not operate the charger with a damaged cord or plug, which could cause shorting
and electric shock. If damaged, have the charger repaired or replaced by an authorized
service technician.
• Do not operate the charger if it has received a sharp blow, been dropped, or has otherwise
been damaged in any way. Take it to an authorized service technician for an electrical
check to determine if the charger is in good working order.
• Do not disassemble the charger. Take it to an authorized service technician when service
or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
• Unplug the charger from the electrical outlet before attempting any maintenance or
cleaning to reduce the risk of electric shock.
• Disconnect charger from the power supply when not in use. This will reduce the risk of
electric shock or damage to the charger if metal items should fall into the opening. It will
also help prevent damage to the charger during a power surge.
• Risk of electric shock. Do not touch the uninsulated portion of output connector or
uninsulated battery terminal.
• Save these instructions. Refer to them frequently and use them to instruct others who
may use this tool. If you loan this tool to someone else, also loan these instructions to
them to prevent misuse of the product and possible injury.

PREPARATIon

Before attempting to use the charger, familiarize yourself with all of its operating features
and safety requirements.
6 CHARGER FOR COMPACT IMPACT DRIVER/AUTO HAMMER