DWT BS07-75 V Manual Original página 13

Power tool specifications
Belt sander
Power tool code
Rated power
Power output
Amperage at voltage
No-load belt speed
Sanding belt size (L x b)
Weight
Safety class
Sound pressure
Acoustic power
Weighted vibration
information
Always wear ear protection if the sound
pressure exceed 85 dB(A).
Declaration of
conformity
We declare under our sole responsibility that the
product described under "Power tool specifications"
is in conformity with all relevant provisions of the di-
rectives 2006/42/EC including their amendments and
complies with the following standards:
EN62841-1,
EN62841-2-4,
EN55014-1:2017,
EN55014-2:2015,
EN61000-3-2:2014,
EN61000-3-3:2013�
Certification
manager
Merit Link International AG
Stabio, Switzerland, 03�09�2019
safety rules
WARNING - To reduce the risk of injury,
user must read instruction manual!
[127 V ~50/60 Hz]
[230 V ~50/60 Hz]
Noise
Wu Cunzhen
General
BS07-75 V
742593
743750
[W] 750
[W] 200
127 V [A]
230 V [A]
[m/min] 100-290
[mm] 457 x 76
[inches] 18" x 3"
[kg]
[lb] 6�39
[dB(A)] 89,8
[dB(A)] 100,8
[m/s ] 2,14
2
WARNING! Read all safety warnings, in-
structions, illustrations and specifications
provided with this power tool. Failure to fol-
low the warnings and instructions may result
in electric shock, fire and / or serious injury.
Save all warnings and instructions for future refer-
ence.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operat-
ed (cordless) power tool�
Work area safety
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents�
• Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable liq-
uids, gases or dust. Power tools create sparks which
may ignite the dust or fumes�
• Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to lose
control�
Electrical safety
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Un-
modified plugs and matching outlets will reduce risk
of electric shock�
• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded�
• Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock�
English
13
5�4
3�2
2,9
BS09-75 V
742609
743767
900
350
6�5
3�9
200-380
533 x 76
21" x 3"
3
6�6
90,1
101,1
1,88