Manuales relacionados para Truper Expert MADE-30NX
Resumen de contenidos para Truper Expert MADE-30NX
- Página 1 Instructivo de 30 kg 2 000 W Demolition Hammer Applies for: Code Model 100894 MADE-30NX MADE-30NX Read this manual thoroughly CAUTION before using the tool.
-
Página 2: Tabla De Contenido
Contents CAUTION Technical Data Power requirements To gain the best performance of the tool, prolong the duty life, General power tool safety warnings make the Warranty valid if necessary, and to avoid hazards Safety warnings for the use of fatal injuries please read and of demolition hammers understand this Manual before using the tool. -
Página 3: Technical Data
Technical Data MADE-30NX Code 100894 Description 30 kg Demolition hammer Voltage 127 V~ Frequency 60 Hz Current 15 A Power Impact energy 2 000 W 62 Joules Weight 30 kg Tool holder HEX 1 ” Work cycle 50 min work per 20 min rest. Maximum 6 hours per day Conductors 16 AWG x 2C with insulating temperature of 221 °F Insulation... -
Página 4: General Power Tool Safety Warnings
General power tool safety warnings WARNING! Read carefully all safety warnings and instructions listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references. -
Página 5: Safety Warnings For The Use Of Demolition Hammers
Safety warnings for the use of Demolition Hammers Choose the appropriate drill or attachment While operating the demolition hammer CAUTION • The tool is designed to work with bits CAUTION • Hold the tool by its handle and by or accessories with 1 1/8" HEX shanks. Choose the the auxiliary handle. -
Página 6: Parts
Parts Non-skid handles Ventilation slots Switch Cable protector Power Aluminum cord head Retaining lever Tool holder ENGLISH... -
Página 7: Assembly And Adjustments
Assembly and adjustments Assembly and adjustments Accessory mounting CAUTION To prevent accidents, confirm that the switch is off and disconnect the plug from the power supply. WARNING Wear gloves whenever you change accessories. They can become extremely hot during the operation. -
Página 8: Start Up
Start up ON AND OFF • Press and hold the switch to start the hammer demolition. • To stop the use, release the switch. Maintenance Cleaning and care Lubrication • Clean the machine with a soft cloth, moistened with soap •... -
Página 9: Authorized Service Centers
In the event of any problem contacting a Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 0187-8737 to get information about the nearest Service Center. DE TODO PARA LA CONSTRUCCIÓN FIX FERRETERÍAS... -
Página 10: Warranty Policy
. Transportation costs resulting from compliance of this warranty will be covered by For questions or comments, call 800-690-6990. Made in China. Imported by Truper S.A. de C.V. Parque Industrial 1, Jilotepec, Edo. de Méx. C.P. 54240 Stamp of the business.