Publicidad
Idiomas disponibles
Idiomas disponibles
EN
With the Poppstar air hose reel twisted or knotted hoses are a thing of the past. Thanks to the auto rewind mechanism the
hose can be rolled up quickly and neatly after use. The metal mounting bracket allows for an easy installation and a rotation of
the reel up to 180°. As the air hose reel comes pre-assembled, you can immediately put it into operation.
The delivery contains: 1 air hose reel with mounting bracket, 2 dowels, 2 screws.
Technical speci cations
Working pressure:
Bursting pressure:
Temperature:
Size of connector:
Size of hose:
Length of inlet hose:
Length of outlet hose:
Use
1.
Check package contents for completeness.
2.
Use the metal mounting bracket of the air hose reel as a drilling template and mark the positions of the screw holes on
the wall or ceiling.
Please note: If the air hose reel is mounted to a wall, we recommend keeping a minimum distance of 80 cm between the
metal mounting bracket and the oor. If the air hose reel is mounted to a ceiling, we recommend a ceiling height of 2,5 m.
3.
Drill two M6 holes.
4.
Fix the metal mounting bracket to the wall or ceiling with the dowels and screws provided.
Please note: The dowels and screws are suitable for brickwork. If you like to mount the air hose reel to a di erent carrier
: The dowels and screws are suitable for brickwork. If you like to mount the air hose reel to a di erent carrier
material, please use appropriate mounting screws.
5.
Connect the inlet hose to the quick connector of your compressor.
6.
Now pull the outlet hose until you reach the required length. The hose has 2-3 locking positions per meter.
Please note: Please stop pulling the hose if it has been completely unrolled from the reel.
7.
Connect the outlet hose to the connector of your pneumatic tool.
8.
To roll up again the outlet hose after use, please release the locking mechanism with a short tug and let the hose roll up
in a controlled manner.
Please note: If the hose does not retract automatically, hold the hose at the yellow warning mark and pull it jerkily
until it retracts.
Safety advice
•
Do not use the air hose reel if it has visible damages.
•
Put the air hose reel in operation only after it has been mounted to a wall or ceiling.
•
Never attempt to modify the device.
•
The air hose reel is only intended for use with compressed air. It is not designed to be operated with liquids or
combustible gases.
•
The air hose reel must be operated with a compressor. It is not permitted to use compressed-air cylinders.
•
Never operate the device at a pressure that exceeds the bursting pressure of the air hose reel or the maximum
permissible air pressure of the pneumatic tools connected.
•
Do not let roll up the hose in an uncontrolled manner, apping air hoses may cause injuries.
•
Protect the air hose against oil, sharp edges and high temperatures.
•
Please keep the device away from children.
8 bar
24 bar
-5°C bis +45°C
1/4" BSPT
Ø 8 x 12 mm
1 m
10 m
Publicidad
