Vega 10081428 Instrucciones De Uso página 17

Translation Operating instructions – Safe
7.2 Administrator mode
The administrator mode is intended for personnel exclusively.
Make sure that the administrator code is accessible exclusively to personnel.
Ü
In administrator mode, it is possible to
open the safe.
è
change the administrator code.
è
Activate administrator mode
Quickly press the * key 2x.
Ü
The display shows SUPER.
Enter the administrator code.
Ü
Confirm with the # key.
Ü
Administrator mode is activated.
i
After entering a wrong code three times in a row, entering the code again is only
possible after waiting about 5 minutes.
Changing administrator code
Activate administrator mode.
Ü
Enter operating code 01.
Ü
Confirm with the # key.
Ü
The display shows NEW.
Enter a new administrator code (6 digits).
è
Confirm with the # key.
Ü
The display shows REPEAT.
Re-enter new administrator code.
è
Confirm with the # key.
Ü
The display shows GOOD.
Administrator mode is changed.
To contact our customer service please visit www.servicevega.com
17