ASROCK 775i65G Manual Del Usuario página 17

USB 2.0 Header
(9-pin USB67)
(see p.2 No. 16)
Shared USB 2.0 Header
(9-pin USB4_5)
USB_PWR
(see p.2 No. 26)
Infrared Module Header
(5-pin IR1)
(see p.2 No. 17)
Internal Audio Connectors
(4-pin CD1, 4-pin AUX1)
(CD1: see p.2 No. 19)
(AUX1: see p.2 No. 20)
Front Panel AC'97 Audio Header
(8-pin AUDIO1)
(see p.2 No. 21)
ASRock 775i65G Motherboard
The I/O panel accommodates
USB_PWR
P-7
6 default USB 2.0 ports. If those
P+7
GND
DUMMY
USB 2.0 ports on the I/O panel
are not sufficient, this USB 2.0
1
GND
header is available to support 2
P+6
P-6
additional USB 2.0 ports.
USB_PWR
This USB4_5 connector is shared
1
with the USB 2.0 ports 4,5 on
USB_PWR
P-5 P-4
the I/O panel. When using the front
P+5 P+4
GND
GND
panel USB ports by attaching the
DUMMY
front panel USB cable to this
connector (USB4_5), the USB
ports 4,5 on the I/O panel will not
be able to function.
This header supports an
IRTX
+5VSB
DUMMY
optional wireless transmitting
and receiving infrared module.
1
GND
IRRX
These connectors allow you
CD1
AUX1
to receive stereo audio input
from sound sources such as
a CD-ROM, DVD-ROM, TV
tuner card, or MPEG card.
This is an interface for front
GND
panel audio cable that allows
BACKOUT-R
convenient connection and
BACKOUT-L
control of audio devices.
1
AUD-OUT-L
GND
AUD-OUT-R
MIC-POWER
MIC
1 7 1 7 1 7 1 7 1 7