Installing Your Phone; Connecting The Base Station - AmazonBasics B07PDGZ8X7 Manual Del Usuario

CLOCK/ALARM
- DATE & TIME
- SET ALARM
NOTICE
*Only available if a phone book entry is stored.

Installing Your Phone

Connecting the Base Station

1. Plug the mains cable and telephone line cord into their
corresponding sockets in the back of the base station.
2. Plug the mains adaptor into a 100 - 240 VAC, 50-60 Hz mains
outlet, and the telephone line cord into a telephone line socket.
WARNING
NOTICE
10
PERSONAL SET
- HANDSET TONE
- RING VOLUME
- RING MELODY
- KEY TONE
- BASE TONE
- RING VOLUME
- RING MELODY
- HANDSET NAME
- AUTO ANSWER
- LANGUAGE
- DONOTDISTURB
The dial mode is based on the country version; for some countries it will not
show in the menu and is preset to tone dialling.
Always use the cables provided in the box.
Use only the supplied adaptor, as others may
damage the unit.
Place the base unit within easy reach of the
mains outlet.
Never try to lengthen the mains cable.
The base station needs mains supply for
normal operation, and the cordless handsets
will not work without it.
ADVANCED SET
- ECO MODE
- ECO PLUS
- AUTO PREFIX
- RECALL TIME
- DIAL MODE
- CHANGE PIN
- REGISTER
- UNREGISTER
- RESET