Service Centre; Cleaning And Maintenance - Max 56015 Manual De Instrucciones

Use
Fit the dust collector (4) to the mouse sander.
Keep hands away from the sander and plug
the sander in.
Hold the mouse sander with both hands
on the handle (2), and switch on using the
on/off switch (1).
Apply the sanding pad to the item. Give the
sander time to work. It is rarely necessary to
press the pad hard against the surface to be
worked.
Avoid blocking the vent holes, as this may
cause the mouse sander to overheat.
Switch the mouse sander off using the on/off
button and unplug it.

Cleaning and maintenance

Use a brush to remove any dirt from the
mouse sander after each use.
Ensure the ventilation slots are free of dirt.
If necessary, wipe the mouse sander with a
well-wrung cloth.
Never use corrosive or abrasive cleaning
agents, as they may attack the plastic parts of
the mouse sander.
22

Service centre

Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
• Complaints
• Replacements parts
• Returns
• Guarantee issues
• Open weekdays from 8.00 to 16.00
(Fridays until 15.30)
• E-mail: service@schou.com