Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Install Side Burner Frame to Firebox
14
Unscrew the 2 Phillips Head bolts ¼ inch from the upper left and right corner holes in the left side of the
firebox as shown in Inset 1. The bolts extending out of the firebox sides are to attach the Side Burner
Frame.
Slide the upper holes of the Side Burner Frame over the heads of the 2 Phillips Head Bolts and drop
down.
Use 2 Phillips Head Bolts (M6x16mm) to attach the lower holes in the Side Burner Frame to the firebox
as shown in Inset 2.
Tighten the 2 previously loosened Phillips Head bolts.
Phillips Head Bolt M6x16mm
Qty: 2
Inset 2
15
Inset 1
Publicidad
Tabla de contenido
