Recording
1. To record to a cassette, install a blank cassette as
described earlier.
2. Set the function selector to the radio position.
3. Select your preferred radio station as described above, and
press record to Record from the radio.
4. Pressing Record while the function selector is in the tape
position will record from the built-in condenser microphone
instead of the radio.
Cleaning the Unit
• The exterior casing of this unit may be cleaned with a dust cloth.
Use caution when cleaning and wiping any plastic parts.
• Mild soap and a damp cloth may be used to clean the front panel.
• The tape heads, capstan and pinch roller should be cleaned after
every 100 hours of use. Use a cotton swab moistened with head
cleaning solution or isopropyl alcohol, then carefully dry with
another cotton swab.
Note: Never use metal objects on or near the tape heads.
Do not allow any cleaning materials to fall into the tape assembly.
Note: Make sure that the erase prevention
tab on top of the tape has not been cut
off. If these tabs have been removed, the
tape cannot be used for recording.
7