Kenmore 146.23681310 Manual De Uso página 44

Cabinet Doors
13
Remove the (4) M5x15 screws pre-assembled to the door handles ends, and use them to
attach handles to doors.
Attach the tool hook at back of left cabinet door with (3) M4x10 screws.
For each door, insert the bottom hinge pin into the hole in the front bottom of the cart. (A)
Push the top hinge pin down into the door, align it with the top hinge pin hole, (B) and let the
pin pop back up, securing the door in position.(C)
Note: If the door do not line up when closed or cannot close freely, loosen the screws on the
door pin bracket(D). Adjust the door pin bracket as necessary, and retighten screws.
Recheck door alignment once grill is completely assembled and readjust if necessary.
M4X10 screw Qty: 3 pcs
C
B
D
A
44 • 146.23686310