LG LB49 Serie Manual Del Propietário página 30

6
SAFETY INSTRUCTIONS
y Do not install the product on places such as unstable shelves or inclined
surfaces. Also avoid places where there is vibration or where the product
cannot be fully supported.
Otherwise, the product may fall or flip over, which may cause injury or
damage to the product.
y If you install the TV on a stand, you need to take actions to prevent the
product from overturning. Otherwise, the product may fall over, which may
cause injury.
y If you intend to mount the product to a wall, attach VESA standard mounting interface (optional
parts) to the back of the product. When you install the set to use the wall mounting bracket (optional
parts), fix it carefully so as not to drop.
y Only use the attachments / accessories specified by the manufacturer.
y When installing the antenna, consult with a qualified service technician. If
not installed by a qualified technician, this may create a fire hazard or an
electric shock hazard.
y We recommend that you maintain a distance of at least 2 to 7 times the
diagonal screen size when watching TV.
If you watch TV for a long period of time, this may cause blurred vision.
y Only use the specified type of battery.
This could cause damage to the remote control.
y Do not mix new batteries with old batteries.
This may cause the batteries to overheat and leak.
y Batteries should not be exposed to excessive heat. For example, keep away from direct Sunlight ,
open fireplace and electric heaters .
y Do not place non-rechargeable batteries in charging device.
y Make sure there are no objects between the remote control and its sensor.
y Signal from Remote Control can be interrupted due to external/internal
lighting eg Sunlight, fluorescent lighting.
If this occurs turn off lighting or darken viewing area.
y When connecting external devices such as video game consoles, make
sure the connecting cables are long enough.
Otherwise, the product may fall over, which may cause injury or damage
the product.
y Do not turn the product On/Off by plugging-in or unplugging the power plug
to the wall outlet. (Do not use the power plug for switch.)
It may cause mechanical failure or could give an electric shock.