Evga 550W / 650W / 750W Cable Configuration - EVGA 550W Manual Del Usuario

550W / 650W / 750W Power Supply User Manual
3. Connect the 20+4-Pin ATX cable to the motherboard.
4. Connect the 4+4-Pin EPS12V cable to the motherboard.
5. Connect the 6/6+2-Pin PCI-E cables to your graphic card(s).
NOTE: Do not attempt to plug an 8-Pin PCI-E cable into a 6-Pin
connector without first detaching the two extra pins.
6. Connect SATA power cables to all data drives or optical drives.
(hard drives, solid state drives, optical drives)
7. Connect the peripheral "Molex" 4-Pin connectors for fans, pumps,
legacy components and other devices/adapters.
8. Connect the AC power cord to your power supply and to the wall.
Check all connections to assure a solid connection and turn the
power switch on the power supply to the ON position.
English
4
550W / 650W / 750W Power Supply User Manual
EVGA 550w Cable Configuration
Connector Cables
MB 1 x ATX 20+4-Pin
1 x EPS/ATX12V 8(4+4)-Pin
CPU
VGA 1 x PCI-E 8(6+2)-Pin x 2
SATA 2 x SATA 5-Pin x 3
1 x Molex 4-Pin x 3 + 1 Floppy
PERIF
EVGA 650w Cable Configuration
Connector Cables
MB 1 x ATX 20+4-Pin
CPU 1 x EPS/ATX12V 8(4+4)-Pin
VGA 1 x PCI-E 8(6+2)-Pin x 2
SATA 2 x SATA 5-Pin x 3
1 x Molex 4-Pin x 3 + 1 Floppy
PERIF
EVGA 750w Cable Configuration
Connector Cables
MB 1 x ATX 20+4-Pin
CPU 1 x EPS/ATX12V 8(4+4)-Pin
VGA 1 x PCI-E 8(6+2)-Pin x 2
3 x SATA 5-Pin x 3
SATA
PERIF 1 x Molex 4-Pin x 3 + 1 Floppy
5
English