Evga 500W Cable Configuration; Evga 500W Specification - EVGA 500B Manual Del Usuario

500W / 600W Bronze Power Supply User Manual
4. Connect the 20+4-pin ATX cable to the motherboard.
5. Connect the 4+4-pin EPS12V cable to the motherboard.
6. Connect the 6/6+2-pin PCI-E cables to your graphic card(s).
NOTE: Do not attempt to plug an 8-pin PCI-E cable into a 6-pin
connector without first detaching the two extra pins.
7. Connect SATA power cables to all data drives or optical drives.
(hard drives, solid state drives, optical drives)
8. Connect the peripheral "Molex" 4-pin connectors for fans, pumps,
legacy components and other devices/adapters.
9. Connect the AC power cord to your power supply and to the wall.
Check all connections to assure a solid connection and turn the
power switch on the power supply to the ON position.
English
4
500W / 600W Bronze Power Supply User Manual

EVGA 500W Cable Configuration

Connector Cables
MB 1x ATX 20+4 pin
CPU 1x EPS12V 4+4 pin
VGA 1x PCI-E 6+2 pin x2
SATA 2x SATA 5 pin x3
PERP 1x Molex 4 pin x3
FDD PERP to FDD
EVGA 500W Specifications
500W BRONZE
AC100-240V~, 50-60 Hz, 8/4A
AC Input
DC Output +5V +3.3V
20 24
MAX output, A
120
Combined, W
Output power,
Pcont
Dimensions: 85mm (H) x 150mm (W) x 140mm (L)
Over Voltage Protection, Under Voltage Protection, Short Circuit Protection, Over Power Protection,
Over Current Protection, Over Temperature Protection.
+40°C ambient @ full load
+12V -12V
40 0.3
480
3.6
500W @ +40°C
5
+5Vsb
3
15
English