Tools Needed - Protemp PT-515-120 Manual Del Usuario E Instrucciones De Uso

5

Tools Needed:

– Phillips Head screw driver.
– 7 mm open end wrench.
1. Align holes in heater leg frame with lower
inner bracket.
2. Attach lower outer bracket to lower inner
bracket using screws.
3. Align lower inner bracket with side support.
4. Attach side supports to heater using tilt
adjustment knob.
5. Slide side supports into upper brackets, align
holes and insert screws to tighten.
6. Slide upper handle brackets onto front
handle, align holes and insert screws to
tighten.
7. Slide rear handle into upper handle brackets,
align holes and insert screws to tighten.
© 2018 Pinnacle Climate Technologies, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE CONNECTED TO A
®
ASSEMBLY INSTRUCTIONS
1 / 2
POWER SOURCE
6 / 7
4 Turbo Electric Fan Heater User's Manual
3
4