CAMBRIDGE MaytRx Guía De Referencia página 20

Bar Module Granite Countertop Installation:
1. Once all the wall block has been set it is time to install the counter tops. There are 2 pieces in
the kit, make sure you have enough people to help with the panels due to the weight of each
piece. Uncrate the granite and set the slabs carefully on top of the grill module wall block base.
2. Use retaining wall adhesive to glue the counter tops down to the base. You need to maintain a
consistent overhang of the base on all polished edges.
3. Using clear exterior silicone sealer install a bead of sealer between:
(1) 20 ¼" seam between pieces 1&2.
4. Using the black wedge shims level all the countertop pieces so they are solid and do not rock or
teeter. Keep in mind to maintain a 29" opening between Granite top pieces #1 & #2 so the bar
center can slide in easily.
5. Once the glue on the countertops has dried, install clear exterior silicone sealer around the un-
derside of the granite tops sealing any openings or voids between the bottom of the counters and
the top of the wall stone. With the same silicone, seal all the seams on the countertops to prevent
any moisture from getting in. Wipe off any excess silicone and once it has dried, trim the sur-
face with a razor blade if necessary.
6. You are now ready to install the appliances. Please follow the diameter supplied with each ap-
pliance.
Cambridge Pre-Packaged / Pre-Cut
MaytRx Wall Bar Module
19
2011