GoPro Dual HERO System Guía De Usuario página 7

Step 4
Hook the Side edge of the
Sync Cable into the primary
camera's right side groove.
Note: Upon insertion of the Sync Cable, the primary (right) camera will automatically set itself to UP mode (right side up), and the
secondary (left) camera will automatically set itself to UPd mode (upside down). These settings are required for simultaneous
capture, and for recording synchronized footage to create 3D content.
Step 5
Push both Sides and
the HERO Ports of each camera.
Make sure the Sync Cable is fully
inserted and lays flush against
the back of the cameras.
Step 6
into Close the housing.
7