Publicidad
Before assembly of the bouncer, take all the parts out of the packing and check if all of the bellow
listed are present. Keep the packages until you finish the assembly completely.
SEE FIGURE PD: A.Foot rest (1 pc); B.Spinning toy (1 pc); C.Side toy (1 pc); D.Hanging toys (3 pcs);
E.Music toy (1 pc); F.Seat (1 pc); G.Stands (3 pcs); H.Base tubes (3 pcs); I.Seat frame (1 pc).
1.Step 1 – See Figure 1.1: Connect each base tube as shown on the figure. After each connecting you
will hear a clicking sound. The base must be shaped as circle.
2.Стъпка 2 – See Figure 2.1: Connect the stands to the base of the baby jumper. After each
connecting you will hear a clicking sound.
3.Стъпка 3 – See Figure 3.1: Take the plastic base of the seat. Slide the stands' belts into the
corresponding holes of the seat base. Fix them using metal buckles.
4.Стъпка 4 – See Figure 4.1: Attach the foot rest to the base as shown.
5.Стъпка 5 – See Figure 5.1.1: Place the must toy on the plastic base. Fix it using the plastic pins
bellow.
6.Стъпка 5 – See Figures 5.1.2, 5.1.3 и 6.1: Attach each of the toys to the seat base. Then attach the
fabric to the seat. Fix it and place the seat on the base. Finally attach the hanging toys to the stands.
1.The music toy is with several buttons. See Figure МТ: ON/ OFF – turning on or off; Change melody
when pressing – button for various melodies.
2.The toy will automatically turn off after 45 minutes.
3.The music toy works with batteries: 3 pcs AAA (LR03) 1.5V.
4.Place the batteries as follows:
a.We recommend you to place the batteries in the compartment of the toy before attaching it to the
jumper.
b.Use a screwdriver to remove the screw from the cover of the battery compartment.
c.Place inside the compartment 3 pcs 1.5V AAA (LR03) alkaline batteries. Follow the polarity marked
on the bottom of the cover.
d.Reattach the cover on top of the compartment and fix it using the screw and screwdriver.
e.When the lights and sounds are low or not active at all, change the batteries with new ones.
RECOMMENDATION AND WARNINGS FOR THE SAFE USE OF THE BATTERIES
1. Do not allow children to play with the batteries.
2. 2. Always use new batteries.
3.Do not mix old batteries with new ones.
4.Always use batteries from the same type. Do not mix alkaline, standard (Carbon - Zinc), or
rechargeable (Nickel – Cadmium) batteries.
5.Always remove the discharged batteries.
6.After removing the discharged batteries, throw them away at the designated places, not with the
household waste. They are recyclable. Do not throw them in fire. Risk of explosion or leakage.
7.Always change all the batteries, when removing the discharged one. Children should not be present
while you are replacing the batteries.
8.Always remove the batteries, if you will not use the product for a long period of time.
9.Do not modify the electric line and do not add any parts to it.
10.Do not recharge batteries, which are not rechargeable.
PARTS
ASSEMBLY STEPS
MUSIC TOY
13
Publicidad
