Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
D17
F
Install the wiring cover plate. Make sure all
wiring connections are inside the box or under
the wiring cover plate.
D19
H
Connect wiring from the motor to the wiring cover plate.
D21
I
Secure the motor by tightening the 2 screws.
D18
G
Tighten the wiring cover plate screw.
D20
Reinstall the motor by inserting the tabs and pushing up into
position. Make sure the wires are not pinched between the
D22
17
41722-01 09/09/2011
•
H
motor and the housing.
Turn on the power source.
Publicidad
Tabla de contenido
