Control Panel; Temperature Setting - Kenmore 580.75080 Manual Del Propietário

CONTROL PANEL
REMOTE CONTROL SIGNAL RECEIVER
[,.. ..............................................
ITIMER
- SHUT-OFF TIME
• You will usually use shut-off time while you sleep
• If unit is running, Usetimer to set number of hours until shut-off
•,Every time you push Timer button, it advancesthe Timer
setting as follows: 1 Hour • 3 Hours• 6 Hours• 10 Hours
maximum.
- START TIME
• If unitis off,Usetimerto set number o f hoursbeforeunitstarts.
TEMPERATURE SETTING
• Use these buttons to automatically control the
temperature of the room. The temperature
can be set to one of a temperature between
64°F to 82°F.
• Push the TEMP up or down buttons to shift
the temperature setting from
82°F • 76°F •70°F •64°F
---_- POWER
• To turn the air conditioner ON, pushthis button.
To turn the air conditioner OFF, push
the button again.
• This buttontakes priority over any other button.
• When you first turn it on, the air conditioner is on
the High cool mode and the Temp. at 70°F.
AUTO RESTART
• In the event of a power failure,
the unit will run at the previous.
• Everytime you push Timer button, it advancesthe Timer setting as follows: 1 Hour• 3 Hours• 6 Hours•10 Hours
maximum.
MODE
• Push this button to shift the mode of operation from COOL-HI • COOL-LOW • FAN ONLY-HI • FAN ONLY-
LOW.
HORIZONTAL AIR DIRECTION CONTROL
The horizontalair directionis adjusted by movingthe vertical
louversright and left with your fingertips. (FIG. 15)
VERTICAL AIR DIRECTION CONTROL
The verticalair directionis adjusted by movingthe horizontal
louvers up and down with your fingertips.(FIG. 16)
)
FIG. 15
-10-