Viking Range Combi-Steam/Convect Guia De Instalacion página 4

Preparation
Follow the directions from 1 to 5 to attach cushions to some parts.
1
CUSHION 1
1. EXHAUST DUCT UPPER
Remove the backing paper from each CUSHION 1. Attach the
CUSHIONS 1 to each side flange of the EXHAUST DUCT UPPER as
shown in the Figure 1.
2
CUSHION 2
2. EXHAUST DUCT BACK
Remove the backing paper from CUSHION 2. Attach the CUSHION
2 at the lower flange of the EXHAUST DUCT BACK as shown in the
Figure 2.
E
3
CUSHION 1
3. EXHAUST DUCT BOTTOM
Remove the backing paper from CUSHION 3. Attach the CUSHION
3 to the EXHAUST DUCT BOTTOM as shown in the Figure 3.
* Start A to attach the CUSHION.
4
4. DIVIDE PLATE L
Remove the backing paper from CUSHION 4. Attach the CUSHION
4 to the DIVIDE PLATE L as shown in the Figure 4.
5
5. DIVIDE PLATE R
Remove the backing paper from CUSHION 5. Attach the CUSHION
5 to the DIVIDE PLATE R as shown in the Figure 5.
3
CUSHION 3
A
CUSHION 4
CUSHION 5