Metra Electronics 95-5817 Instrucciones De Instalación página 4

Double DIN radio provision
Stacked ISO units provision
1. Attach the double DIN brackets to the
double DIN or stacked ISO Mount unit(s)
using the screws supplied with the
unit(s). (Figure A)
2. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
3. Reassemble dash in reverse order
of disassembly.
4. Slide the double DIN radio or
stacked ISO Mount unit assembly
into the modified sub dash until it
clicks into place.
5. Clip the filler bar into the bottom of the
radio opening under the radio assembly
with the rounded edges facing toward
the dash. Tip: Hook one side in then
push the other side in until it clips.
(Figure B)
Kit Assembly 95-5817
(Figure A)
(Figure B)