Metra Electronics 95-5820 Instrucciones De Instalación página 4

1. Clip the hazard/airbag switch
assembly into the radio housing in
the same location as the factory
radio trim panel. (Figure A)
2. Clip the cigarette lighter socket
into the radio housing in the same
location as the factory radio trim
panel. (Figure B)
3. Secure the climate control into the
radio housing using the factory
hardware in the same location
as the factory radio trim panel.
(Figure C)
4. Attach the (6) U style panel clips
to the radio housing in the same
location as the factory radio trim
panel. (Figure D)
Continue to kit assembly
Kit Preparation 95-5820
All Vehicles
(Figure A)
Kit replacement radio trim panel, Rear view
KIT REPLACEMENT RADIO TRIM PANEL-REAR VIEW
(Figure C)
(Figure B)
(Figure D)
4
Kit replacement radio trim panel, Rear view
KIT REPLACEMENT RADIO TRIM PANEL-REAR VIEW