Charging The Headset - PowerLocus P1 Manual De Usuario

Headset will connect to the pre-set phone automatically when turned on (Please
•
check to be sure the blue-tooth functionality of your phone is "on")
If the pairing is not successful, please switch off headset first, and then attempt
•
to re-pair
(4) MP3 / FM
In power-on mode, insert the MicroSD TF card (not included), short-press the
•
MP3/FM button, and the MP3's will play automatically.
If no MicroSD TF card is installed, short-press the MP3/FM button; the FM radio
will then play automatically.
FM Mode
(1) Turn on the headphone, (2) short-press the MP3/FM button 2 times. FM
•
radio will play automatically. (3) Short-press the
to auto search all radio stations. (4) Wait for 40sec up to 1min for the stations
to be memorized. (5) To select the radio station that you want, please then
long-press
flashes slowly.
If you are listening FM radio, short-press MP3/FM button; it will be change to
•
bluetooth mode and auto-connect your phone (or other device).
(5) Answer/End calls, reject calls, last number redial (In
blue-tooth mode)
When there is a call, short-press the
•
press the button to hang up. (If the other party hangs up first, no need press
the button)
Reject call: long-press the
•
Last number redial: short-press the
•
When the phone call is answered, music will pause automatically and enter a
•
"waiting state". After call is finished, the music will resume playing
automatically.

(6) Charging the headset

Insert USB charging cable into the USB block. Connect the cable to a USB power
•
supply that provides 5VDC power (charging block not included). Connect
charging cable to the charging port of headset. When the red light is on, the
or The radio station will be selected, and the blue light
button 2-3 seconds
(multi-function) button
button to answer the call. After the call,
button 2 times