Getting Started - Klarstein Iceblokk 60 Manual Del Usuario

GETTING STARTED

Before first Use
• Remove the exterior and interior packing.
• Before connecting the freezer to the power source, let it stand upright for
approximately 2 hours. This will reduce the possibility of a malfunction in the
cooling system from handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
Installation
l
s
• This appliance is designed to be free standing only.
• Place your freezer on a floor that is strong enough to support the freezer.
• Allow 15 cm of space between the back and sides of the freezer.
• Locate the freezer away from direct sunlight and sources of heat (stove, heater, etc.)
Avoid locating the freezer in moist areas.
• After plugging the appliance into a wall outlet, allow the unit to cool down for 2~3
hours before placing food in the freezer compartment.
EN
15