Kohler K-527 Guia De Instalacion página 5

Outlet
Power Cord
Outlets
Supply Inlets
1. Preparation
If not already installed, install the two-outlet digital valve at this time according to the instructions
packed with the product.
NOTE: Your system can be set up to use up to two user interfaces. One interface, installed inside the
shower, is required.
Determine the location of all components along with their installation requirements before beginning
this installation.
Allow for enough slack in the cables for drip loops.
Install the valve according to the instructions packed with the valve.
Route interface cable(s) to the interface installation location.
Complete the finished wall.
Kohler Co.
Interface
Drip
Loop
NOTE: Only one interface, installed inside the shower, is required.
An additional interface can be installed outside the shower.
5
Interface
Coupler
Drip Loop
20' (6.1 m) Cables
1143086-2-D