EN
Replace the tank and press the COOL
•
button. The sound of the water flowing
should be heard.
Select the desired speed with the
•
button SPEED between:
LOW
Remeber:
•
• If the COOL button is not turned on
the ventilation will only be activated
at room temperature and the desired
speed can only be selected with the
button SPEED.
SWING
Horizontal automatic oscillating function;
The internal vertical slats oscillate,
alternately directing the air to the right
and to the left.
TIMER
Programme the automatic switch-off of
the operating unit.
16
MEDIUM
HIGH
Push
Timing
Once
1 hour
Twice
2 hours
3 times
3 hours
4 times
4 horas
5 times
5 hours
6 times
6 hours
7 times
7 hours
8 times
OFF
ANION (IONISATION)
By pressing this button, the ion generator
will begin to release negative ions into
the environment to purify it while the
indicator light (-Ion) remains on.
REMOTE CONTROL
It has the same functions as those
•
described in the control panel (show
how to install).
Use CR2025 batteries.
•
1. HEATER
2. SPEED
3. COOLER/HUMIDIFIER
4. ON/OFF
5. SWING
6. TIMER
7. ANION (IONISATION)
Button panel
OFF