Troubleshooting - Clatronic LB 3212 Manual De Instrucciones

Troubleshooting

Problem
Appliance does not work.
The POWER lamp is on, but no mist
is producedl
Insuffi cient mist is discharged from
the nozzle
A bad odour is produced
The appliance is abnormally loud
Specifi cations
Model: ......................................................................................................................................................................................................... LB 3212
Power supply: ...................................................................................................................................................................... 220-240V, 50/60Hz
Power consumption: .......................................................................................................................................................................................38W
Protection class: ......................................................................................................................................................................................................II
Net weight: .................................................................................................................................................................................................2.45 kg
Cause
- No power supply
- Electronic defect
- The tank is empty
- The area in and around the
ultrasonic surface (9) is full of water
- The fl oat (8) is stuck
- The ultrasonic surface is fouled
- The water is dirty
- The water is too old or dirty
- The appliance is not standing properly
- The tank is almost empty
42
Solution
- Examine the power supply
connection
- Please contact your dealer or the
service department
- Fill the tank
- Dry the area in and around the
ultrasonic surface
- Check the fl oat
- Clean the ultrasonic surface
- Change the water
- Renew the water and clean the
appliance
- Check the surface
- Fill the tank