Installation Instructions - Truth Sentry 2000 Instrucciones De Instalación

Installation
instructions
Sentry 2000 Motor System
on a Maxim operator
Install motor by slipping the motor over the spline adaptor (B) as
shown. Secure motor with bracket (C). Be sure to use both the
isolation grommet (D) and the push-on fastener (E). Due to the
high torque of the motor, two screws must be used when mount-
ing the bracket (C) to wood or plastic.
Score the inside surface along
the lines shown by using a
utility knife. Break off the tab
at the score line for a proper
fit of the cover around the
widow operator.
12