Fermax LYNX SMILE Serie Manual De Instalador página 56

PROGRAMMING the Monitor
If for any reason you need to reprogram the monitor, the operation required is to reset the
monitor to the factory confi guration.
Restore to Factory Settings.
Selecting this option resets the monitor to its factory settings.
To access Restore Factory Settings, press General Settings and access the screen with
the option Installer Settings (press), it will be necessary to enter the Installer's PIN code,
by default 4444, and press OK, then access the screen with the RESET option that allows to
Delete All Settings / Restore to Factory Settings.
The Reset function allows to:
- Delete user settings: Selecting this option deletes only user-related data,
such as tone settings, images, labels, etc.
- Restore to factory settings: Selecting this option resets the monitor to its
factory settings. The monitor's IP address is deleted and changed back to
the factory address: 10.0.0.1.
28
LYNX SMILE KIT