EGAmaster MASTEREX 79788 Manual De Instrucciones página 13

For your convenience the charger can be seated on its base, or bulkhead mounted.
A bulkhead screw and spacer kit is available separately.
• The charger is designed exclusively for use with lithium- ion battery packs. Do not use it to
charge any other type of battery pack.
• Do not use with any other adapter.
• The adapter is designed for use with an AC power supply voltage between 100V and 240V.
Do not connect it to a power source outside this range.
• Never charge the transceiver whilst it is switched on.
• Unplug the adapter from the mains when it is not in use.
• Do not dismantle.
• Never insert any metal or other conductive objects into the charger.
• Do not touch the charger terminals.
• Never short the charge contacts with metal or any other conductive object.
• Must only be stored/used in a well ventilated, dry area.
NOTE
In the event that your adapter gets wet, do not connect to the mains or switch on.
Consult your dealer immediately.
BULKHEAD MOUNTING
PRECAUTIONS
Bulkhead mounting
hole pattern
13