Internal filter
The average filter life varies from 8 to 12 months, depending on the different modes of use. In order to get the best
purification performance, we suggest replacing it at least once a year.
If the filter is particularly dirty, due to the quality of the air to be purified, the ioniser will warn by flashing red and
will beep 3 times. In this case it is necessary to change the filter as soon as possible.
Filter replacement mode
1) Turn off the power of the device
Multifunction button
Turn
counterclockwise
2) Turn the base counterclockwise to find the filter
4) Turn clockwise to fix the two parts
After changing the filter, press and hold the multifunction button for 8 seconds to start the reset.
At the end of the process, the ioniser will flash green 3 times and restart normal operation.
Only purchase original filters that can be installed on this product.
Technical data
DC5V power supply
Maximum power consumption ≤3W
Environment to purify ≤4m³
Maximum air volume 15CFM
Noise level ≤52dB
Dimensions Ø68.4mm × 174mm
3) Remove the used filter and replace it with a new one
5
EN