Charging Battery; Charging The Battery Via Pc - Brigmton BT- 500 Manual De Instrucciones

POWER SUPPLY

CHARGING BATTERY

1. Install the lithium battery correctly.
2. Plug one port of the supplied USB cable into the USB jack
of the supplied adaptor, then plug the other port into the
USB jack of the unit.
3. Plug the supplied adaptor into the AC socket; Icon
" "appears on the display. The battery power icon
" " flows when the unit start charging.
4. When the battery power is full, icon "
Please first disconnect the adaptor and the radio, and then
disconnect the adaptor from the AC socket.
Note:
1. Please don't listen to the radio while charging the radio via
adaptor to avoid interruption.
2. Please only use the supplied adaptor which comes with
the radio to charge the lithium battery.

Charging the battery via PC

1. Plug one port of the supplied USB cable into the USB jack
of the PC and the other port into the USB jack of the radio.
2. While charging, the battery power icon "
3. When the battery power is full, "
Please disconnect the USB cable from the PC and radio.
"stops flowing.
" flows.
" stops flowing.