VOLUME ADJUST
Press the <V+> or <V-> button to adjust your desired the
volume level.
LOCK SWITCH
To activate the key lock function, push the <Lock> switch
upwards and notice the "
" appears on the display,
push it downwards to deactivate it.
HOW TO TUNE INTO STATIONS
Turn on the unit, push the <MODE> switch upwards to Radio
mode, then select your desired band by pressing either FM /
MW / SW button. Use either of below methods to select
your desired frequency.
1. Auto Scan - / +
To auto scan into stations, long press the < AUTO-/+ >
button until the frequency increasing or decreasing in the
display. The unit will stop tuning when it finds a signal.
You can also fine tune into your desired frequency by
repeatedly short pressing the < AUTO -/+ > button.
2. Manual Tuning
To select your desired station manually, rotate the <Tuning>
knob to increase or decrease the frequency in the display.
Note:
In the memory mode ("H" showing in the display), the
<Tuning> knob can be used for selecting stored memories.
You can return to the frequency tuning by pressing the <