Publicidad
Idiomas disponibles
Idiomas disponibles
U7 ASSEMBLY STEP 3
22
U7
11
10
F
C
B
22
2
16
12
HARDWARE FOR STEP 3
PART
TYPE
F
BOLT
B
FLAT WASHER
C
SPRING WASHER
A
Open HARDWARE FOR STEP 3.
Slide CONSOLE MAST GROMMET (10) from the
B
bottom up the CONSOLE MAST (11).
C
Carefully pull the HEART RATE CABLE (22)
through the CONSOLE MAST (11) using the twist
tie located inside the CONSOLE MAST (11).
D
Attach CONSOLE CABLES (12) and carefully tuck
all cables into BIKE FRAME (2). Slide CONSOLE
MAST (11) into BIKE FRAME (2).
E
Attach the CONSOLE MAST (11) using 4 BOLT
(F), 4 SPRING WASHERS (C) and 4 FLAT
WASHERS (B) from the rear.
F
Slide CONSOLE MAST GROMMET (10) down
over BIKE FRAME (2).
NOTE: Be careful not to pinch any wires
while attaching the console mast.
QTY
4
4
4
Publicidad
