Publicidad
Idiomas disponibles
Idiomas disponibles
R7 ASSEMBLY STEP 2
6
B
C
E
NOTE: Be careful not to pinch any wires while attaching the console mast.
20
5
4
20
1
HARDWARE FOR STEP 2
PART
TYPE
E
BOLT
B
FLAT WASHER
C
SPRING WASHER
A
Open HARDWARE FOR STEP 2.
B
Slide CONSOLE MAST GROMMET (4) from the
bottom up the CONSOLE MAST (5).
C
Carefully pull the HEART RATE CABLE (20)
through the CONSOLE MAST (5) using the twist
tie located inside the CONSOLE MAST (5).
D
Attach CONSOLE CABLES (6) and carefully tuck
all cables into BIKE FRAME (1). Slide CONSOLE
MAST (5) into BIKE FRAME (1).
E
Attach the CONSOLE MAST (5) using 4 BOLTS
(E), 4 SPRING WASHERS (C) and 4 FLAT
WASHERS (B) from the rear.
F
Slide CONSOLE MAST GROMMET (4) down over
BIKE FRAME (1).
QTY
R7
4
4
4
9
Publicidad
