Mopar Jeep Wrangler 2007 Instrucciones Para La Instalación página 7

Power Door Lock Connections - Used for EVS I only.
Skip to Step I for EVS II.
Arm Wire Connection (EVS I only!)
F. Locate the Lt Green/Grey wire in the driver kick
panel. This wire will show +12 volts when the doors
are locked using the keyfob. Center-splice
the harness Lt Blue wire into this wire, fol-
lowing the center-splice procedure.
Disarm Wire Connection (EVS I only!)
G. Locate the Tan/Brown wire in the driver kick
panel. This will will show +12 volts when the doors
are unlocked on the first press of the unlock but-
ton on the keyfob. Center-splice the harness Brown
wire into this wire, following the center-splice pro-
cedure.
Unlock Sense Wire Connection (EVS I only!)
H. Locate the Tan/Brown wire in in the passenger kick
panel. This wire will show +12 volts when the doors
are unlocked only on the second press of the unlock
button on the keyfob. Center-splice the harness Lt
Green wire into this wire, following the center-splice
procedure.
Door Trigger Connection
I. Locate the Yellow/White dome light
feed wire (M24), found at the
underdash courtesy light. Center-
splice to the White wire on the
main security harness.
7