Onezone Thermostat - Airzone ONEZONE Manual De Instalación

ONEZONE THERMOSTAT

The thermostat should be located in a place with good air circulation, and not exposed to direct sun light, light spots or above
heaters, and not on external walls. The correct location is:

In an area with air circulation.

Away from direct currents of cold or hot air.

Away from sources of heat such as heaters or radiators.

Out of direct sun exposure.

Preferably not installed on exterior walls.
To install the thermostat, follow steps:
1. Remove the thermostat wall base and present it in the wall and mark to level it,
2. Affix the wall base with tape or screws,
3. Open the thermostat, and insert the batteries (AAA Type), following the polarity indications. To open the thermostat
insert a coin in the gap located in the bottom part of the thermostat frame, and turn it to open the thermostat,
4. Insert the back plate to the wall base, and then, insert the thermostat in the hooks located in the base and press the
thermostat against the base to lock it in position.
EN
EN
FR
IT
PT
DE
7