Decimal Point; Temperature Unit - Kübler Codix 532 Manual Del Usuario

5.4.2 Reference point compensation (Continued)
Reference point compensation
Selection in the menu
Internal reference point
compensation
External reference point
compensation
Adhere to point 5.4.2.1
5.4.2.1 External reference point temperature
External reference point
temperature
Selection in the menu
...
Input of the known value of the external reference
point temperature in 0,1 °C/0,1 °F, according to the
temperature unit set

5.4.3 Decimal point

Decimal point
Selection in the menu
Resolution 0,1 °C/0,1 °F
Resolution 1 °C/1 °F
5.4.5 Correction value
Inputting a correction value allows acting upon the
displayed result. These correction values may be
Setting the correction value
Selection in the menu
...
16
...

5.4.4 Temperature unit

Selection in the menu
positive or negative. The input is always made with one
decimal place.
...
Unit
Display in °C
Display in °F
Correction value in 0,1 °C/0,1 °F,
depending on the unit selected