Function Buttons; Pressure Testing - Trust PANORA Guía Avanzada

Trust Flex Design Tablet
6. Hot Cells – Easy shortcuts for frequently used functions
a
- Go to the 'Hot Cells' tab to activate/disable the Cells.
b
- Click on the specific Cell to assign or delete a function.
- Click on
to assign a new function or
c
- Click on 'Apply'  The Tablet is being updated.

7. Function Buttons

a
- Go to the 'Function Buttons' tab and click on the specific key to adjust the function.
- Click on
to add a new function or
b
- Click on 'Apply'  The Tablet is being updated.
8. Function Wheel
a
- Go to the 'Function Wheel' tab and select the action you want to add/delete.
b
- Click on the arrows to add/delete the action*.
- Click on to reverse the selected Action.
c
- Click on 'Apply'  The Tablet is being updated.

9. Pressure Testing

a - Go to the 'pressure' tab and tap the white area with your pen to check if the pen registers the
pressure correctly.
b - Drag the cursor to adjust the pressure sensitivity. ***
- Click on 'Apply'  The Tablet is being updated.
10. Saving & Loading settings
a - Go to the 'tablet' tab, click 'Save Settings' / 'Load Settings' to save / load your current settings.
b - Choose the file location and click 'Save' / 'Open'.
c - Click on 'Apply'  The Tablet is being updated.
* Function/Action may vary in different programs.
** Multiple functions can be added to a single cell / key, these will be executed in a sequence.
*** Pressure sensitivity must be supported by the used program.
to delete the function of the selected Cell. * **
to delete the function from the selected key. * **
3