Sanitaire 6060 Serie Guía De Usuario página 5

Operations
Cleaning with your Deep Cleaner
1. Plug unit in and turn ON by pressing the Power
Button.
2. Hold cleaning tool approximately 2.5cm above
soiled surface. Press spray trigger to apply cleaning
formula to soiled area.
3. Using the brush on the cleaning tool, gently scrub
area to be cleaned.
4. For thorough cleaning, spray additional formula
while brush and suction are in contact with surface.
5. Apply downward pressure on cleaning tool and
pull it toward you. The suction will remove the dirt
and cleaning formula. Continue until no more dirt
can be removed.
6. As a final step, use "drying strokes" (by not
pressing the spray trigger) to remove as much liquid
as possible. Repeat this step as often as necessary.
Cleaning with 6" Tool
1. Attach the 3"/4"/6" Tough Stain Tool to the
handheld cleaning hose.
2. Press the spray trigger to mist formula over and
onto the soiled area.
3. Release spray trigger and gently scrub the stain.
4. To lift the stain away, apply downward pressure
on the tool and slowly pull it toward you. Then
use "drying strokes" to remove remaining moisture.
Repeat as needed.
WARNING
Keep spray away from face. Failure to do
so may result in personal injury.
IMPORTANT
Check the manufacturer's tag before clean-
ing upholstery. Test a small, hidden area
for colourfastness. If colour is affected, do
not use. If manufacturer's tag is missing
or not coded, check with your furniture
dealer.
www.sanitairecommercial.com 5