Technical Specifications; User Manual - PNI S60 Manual De Usuario

CB Antenna PNI S60

Technical specifications

• Frequency: 26 - 28 MHz
• Power: 30 W (continuous) / 200 W (for short time)
• S.W.R.: ≤ 1.2:1
• Whip length: 590 mm
• Impedance: 50 Ohm
• Connector: DV
• Temperature: -26°C ~ +60°C
Installation
• Attach the antenna to a fixed bracket (eg. PNI L1) previously mounted on
your car using the connector on the cable included in the package.
• Insert the PL259 connector into the CB radio.
• Measure the SWR of the antenna in an open area using a reflectometer.
• In some cases, it might be necessary to raise or shorten the whip of the
antenna to get an optimal SWR value. For maximum performance, we
recommend that this procedure, called tuning, be performed by qualified
personnel.
Datasheet 2