Maintenance; Operation; Control Panel - Selecta FRIGEDOR REG Manual De Instrucciones

INSTRUCTION MANUAL CODE 80040
9
7
6
J
.P. SELECTA s.a.u.
REV D Nov/2017
Be sure that the voltage supply is the same as the one
indicated on the characteristic plate of the equipment.
Do not use the unit to cool highly inflammable liquids.
Do not use the equipment if it is NOT earthed.
If you have to change the plug, bear in mind the following:
Blue cable:
Brown cable:
Yellow/green cable:

MAINTENANCE

Before removing the side cover, disconnect the equipment
from the mains.
The guarantee will not have any effect if the equipment is
manipulated by somebody who has not been expressly
authorized by J.P.SELECTA, s.a.u.
CLEANING:
Remove the metallic casing and clean the condenser wings with
the help of a brusher or compressed air. It is recommended to do
it periodically.

OPERATION

CONTROL PANEL:

/ Silicone oil
1. Main switch
2. Temperature regulator
3. Temperature probe plug
4. Pt100 temperature probe
5. Cooling coil
6. Key to scroll parameters
7 Keys to modify parameters
8. Key to exit from the menus
9. Running compressor led
10. Set temperature display
11. Current temperature display
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - http://www.jpselecta.es
(They can be modified without notice)
Neutral.
Phase.
Earth.
3
2
11
1
10
8
Tel (34 3) 770 08 77 Fax (34 3) 770 23 62
Page: 10
5
4